Setup Guide
If you use NetWare 4.x, menus will differ slightly from the menus described in the following procedure, and you must select Bindery Emulation.
Follow these steps:
1.At the DOS prompt, type PCONSOLE.
2.From the Available Options menu, select Print Server Information.
3.Select the name of a print server from the Print Servers list and press Enter.
4.From the Print Server Information list, select Print Server Configuration.
5.Select Printer Configuration.
6.Select a port number in the Configured Printers list.
7.Select the name of your printer on the Printer Configuration menu. Then highlight the Printer Type and select LPT1.
8.Press Esc; then press Enter to save changes.
9.Select Queues Serviced by Printer from the Print Server Configuration menu and assign a queue to the print server port from the Available Queues list. Then press Esc to exit.
11