Setup Guide

Note:

If you don’t have a CD-ROM drive, you can create diskettes from the CD-ROM using another computer. Under Windows, run the Make Diskettes program on the CD. To make Macintosh diskettes, follow the instructions on page 29.

10.Check the current settings and click Next. Follow the instructions on the screen. Select Yes and click Finish to restart Windows when you see the prompt.

You now need to install the printer driver and set up your printer in Windows.

Installing the Printer Driver

Your driver software is on the EPSON printer software CD-ROM that came with your printer. You need to install the driver on each computer that will send print jobs to the EPSON Stylus COLOR 800N.

The CD-ROM also contains EPSON Answers (Windows only), a comprehensive online guide to using your printer. EPSON Answers was not designed to run over a network or on the Windows NT operating system. If you use it, be aware that some of its features may not work and may cause problems on your system.

If you’re using Windows, Avery LabelPro 3.0 software is also automatically installed on your system. For instructions on using the program, see the online manual. If you require further assistance with the program, contact Avery at (972) 389-3699.

Installing on a PC

1.Make sure the printer is on and Windows is running. Exit any application programs.

If you’re using Windows 95 and you see the New Hardware Found screen, click Cancel at the first opportunity.

2.Insert the EPSON printer software CD-ROM or diskette 1.

26