Technical Specifications
Changing control panel settings
Control Codes
ESC/P 2 control codes
Setting | Options |
|
|
Network I/F mode | Off, On |
|
|
Loading position | 8.5 mm, 3 mm, Others |
|
|
Economy | Off, On |
|
|
Follow these steps to change the settings listed above:
1.Make sure the printer is turned off and has paper loaded.
2.Hold down the X color cleaning button and press the Ppower button. The printer prints a summary of instructions for changing settings and choosing the language to use for additional instructions.
3.Press the X color cleaning button to print a list of current settings and additional instructions.
4.After you make the changes you want, turn the printer off to save the settings. The settings remain in effect until you change them again.
See the ESC/P® Reference Manual for more information about these commands.
General operation:
ESC @, ESC U, ESC EM
Paper feeding:
CR, FF, LF, ESC 0, ESC 2, ESC 3, ESC +
Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O
Print position motion:
ESC $, ESC \, ESC ( V, ESC ( v, ESC D, HT, ESC B, ESC J, VT
Font selection:
ESC k, ESC x, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5, ESC E, ESC F, ESC !
Font enhancement:
ESC W, DC 4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC
Spacing:
ESC Space, ESC c, ESC ( U
Character handling:
ESC t, ESC ( t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7, ESC ( ^
Bit image:
ESC *