4-Inch Wide Roll Paper

Follow these steps to load the roll paper:

1.Make sure your printer and computer are turned on.

2.Before loading the paper, make sure the edge is cut cleanly—at a 90 degree angle in each corner—to ensure proper loading. If necessary, trim the edge using a straight-edge tool or triangle.

3.Remove the printer’s paper support and install the roll paper holder in the same mounting slots. (The sides of the holder are marked R and L to indicate its right and left sides.)

4.Insert the roll paper onto the holder’s spindle, making sure both are oriented as shown here. Then insert the spindle into the roll paper holder.

Insert the end of the spindle with the paper stop on this side

19