7.If the nozzle check pattern has no gaps in its dots, click Finish.
If the pattern is missing dots, click Clean to clean the print head again. If you don’t see any improvement after cleaning three or four times, check the solutions in “Problems Getting Good Print Quality” on page 65. You can also turn the printer off and wait
Examine the nozzle check pattern you print. It should look something like this:
Each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern. If your printout looks okay, you’re done.
If any dots are missing, as shown below, clean the print head again; see page 49 for instructions.
missing dots
missing dots | missing dots |
|
51