4 x 6-inch Photo Paper

The EPSON 4 × 6-inch Photo Paper that came with your printer is micro-perforated around the edges so you can trim your printouts and “bleed” the photo—extend it beyond the perforations—on all sides. This procedure explains how to print your photos from most applications so that they bleed a little beyond the perforations. (If you’re using Image Expert, follow the instructions below to load the paper, then go to page 41 for details about printing. The procedure is slightly different.)

1.Load the paper against the right edge guide with the glossy side facing up and the perforated margins positioned as shown. Then

slide the left edge guide against the paper.

You can load up to 20 sheets at a time, with the included support sheets A and B beneath the stack. (If you don’t have the support sheets, use plain paper cut to size.)

2.In your application software, size

your photo slightly larger than 4 × 6 inches. (If you’re using PhotoDeluxe, use the Advanced menus to size your photo. See your PhotoDeluxe online help for details.)

3.Choose Photo Paper as the Media Type setting.

The larger margin should be at the top

Bottom of printed image

Trim size

Printed image size

Top of printed image

23