Follow the guidelines below when you check the control panel lights.

P is on

The Ppower light is on when the printer is ready to print. It flashes

 

when the printer is receiving a print job, charging ink, or cleaning the

 

print head.

 

 

S flashes and

When the S paper out light flashes and both ink out lights come on,

B and A are on

you have a paper jam. Press the E load/eject button to try to clear the

 

jam. If that doesn’t work, turn off the printer and gently pull out all the

 

paper. Always pull paper forward, toward the output tray. Make sure

 

none of the sheets are curled, creased, old, stuck together, or too thin.

 

Then reload the paper against the right edge guide and slide the left

 

edge guide against it. Turn on the printer and press the E load/eject

 

button to resume printing. (If you’re using roll paper, see page 19 for

 

additional loading instructions.)

 

 

S is on

When the S paper out light comes on, you’re out of paper or your

 

paper is incorrectly loaded. Make sure none of the sheets are curled,

 

creased, old, stuck together, or too thin. Then reload the paper against

 

the right edge guide and slide the left edge guide against it. Press the

 

E load/eject button to resume printing. (If you’re using roll paper, see

 

page 19 for additional loading instructions.)

 

 

B or A flash

When an ink out light flashes, your ink supply is low. Make sure you

 

have a replacement cartridge.

 

 

B or A are on

When an ink out light comes on, you need to replace the ink cartridge.

 

Make sure you have a replacement cartridge. See page 52 for

 

replacement instructions. If an ink out light comes on after you’ve

 

replaced a cartridge, you installed a cartridge your printer can’t use.

 

Remove it and replace it with the correct type.

 

 

P and S flash

When the Ppower and S paper out lights flash, and one or both of the

and

ink out lights come on, jammed paper may be blocking movement of

B and A are on

the print head. Turn off the printer, open the cover, and check inside

 

for any jammed paper. Then turn the printer back on. If the lights still

 

flash and/or come on, contact your dealer or EPSON; see page 76 for

 

information.

 

 

P S B A flash

When all the lights flash, your printer may have an internal error. Make

 

sure you removed all the packing material as described on the

 

unpacking sheet in your printer box. Then turn off the printer, wait a

 

few seconds, and turn it on again. If the lights still flash, contact your

 

dealer or EPSON; see page 76 for contact information.

 

 

60