2.To use the remote control as a wireless mouse, connect the PS/2 mouse or USB cable included with the projector to the MOUSE terminal on the square end of the main cable.
3.Disconnect your mouse from the mouse port on the back of your computer and replace it with the other end of the PS/2 mouse or USB cable. (Your computer’s mouse will be disabled while you are using the remote control as a mouse.)
4.To use the EMP Link V software or to program new effects for the Effects buttons on the remote control, connect one end of the serial cable to the SERIAL terminal on the main cable.
Connect the other end of the serial cable to the serial port on the back of your computer.
5. Tighten the screws on the connectors.
note
If your system uses a serial mouse, perform steps 2 and 3 using the PC serial mouse cable instead of the PS/2 mouse or USB cable.
note
You won’t be able to use EMP Link V if your computer has only one serial port that is being used to support a serial mouse.
Setting Up the Projector 19