Epson 9100i Adjusting the Height of the Image

Adjusting the Height of the Image

You can adjust the height of the image using the lens shift knob on the side of the projector and the projector’s feet.

Using the Lens Shift Knob

Use the lens shift knob on the side of the projector to raise or lower the projected image. Press the knob to make it pop out; then turn it clockwise or counterclockwise to move the lens up or down. When you’re finished, press the knob back in.

caution

Do not hold the projector by the lens; this can damage it.

lens shift knob

Using the Projector’s Feet

If the image is too low, you can extend the projector’s feet to raise the lens. Follow these steps:

1.Stand behind the projector and hold up the front while you squeeze the blue foot release levers against the projector. This unlocks the feet.

46Using the Projector