3.Make sure the DVI/VGA switch on the back panel is flipped to the right, as shown. If necessary, use the tip of a ballpoint pen to slide it over.
DVI/VGA switch (slide to right)
Computer 1
Computer 2 /Component Video
R/Cr/Pr | G/Y | B/Cb/Pb H/C Sync V Sync |
4.Connect the other end of the
computer video cable to the video port on the Macintosh. If it doesn’t fit, you may have to use the Macintosh desktop adapter included with your projector.
To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as
Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with the adapter) into the video port on your Macintosh.
Setting Up the Projector 25