note
If you want to overwrite an existing setting, move to the setting and press Enter.
When the confirmation message appears, choose Yes and press Enter.
Saving and Recalling Computer Settings
When you are projecting from a computer source, you can save and recall settings (resolution, tracking, sync signal, and position) for up to five different sessions. This is useful if you use more than one computer with the projector; you can save the settings for each one and recall them when necessary. Follow these steps to save the current session settings:
1.Press the Menu button on the control panel or remote control to display the Main menu.
2.Press Enter to select the Video menu.
3.Use the down arrow (control panel) or Enter button to move down to the Preset option and press Enter. You see the Preset Selection menu with the current resolution setting displayed.
4.Press Enter to assign it to the next available number.
5.Press Enter again. When you see the “Overwrite?” prompt, select Yes or No and press Enter.
6.Press Esc to return to the Video menu.
When you want to use a saved setting, press the Preset button on the remote control. You see the setting for session number 1 displayed in yellow at the top right of the screen. To select another number, press the Preset button again until the setting number you want is displayed. The projector will reset itself according to the selected setting.
66