note

You can use the projector’s Effect menu to select different cursor stamps. See page 68.

Using the Cursor/Stamp Arrow

You can use the cursor stamp tool as a pointer and place cursor stamps anywhere on your screen. You can choose from three types of stamps.

1.To activate the cursor stamp, press button 1 on the remote control. A green pointer appears in the upper left corner of the screen. To try a different stamp, press 1 again. Press 1 again to see the third one.

2.Press the side of the Enter button to move the pointer wherever you want it.

3.To “paste” the pointer on the screen, press down in the center of the Enter button. You can then continue to work with another pointer, moving it around the screen or pasting it wherever you want.

4.To erase the pointers pasted on the screen, press button 5.

5.To cancel the cursor stamp feature, press Esc.

note

You can use the projector’s Effect menu to change the color and shape of the box. See page 68.

Drawing Boxes

You can draw outline boxes on the screen to highlight areas of your presentation or video.

1.To activate the box tool, press button 2 on the remote control. A small pink square appears in the upper left corner of the screen. This is the “box-drawing” tool.

2.Press the side of the Enter button to move the square where you want to begin drawing the box.

3.Press down in the center of the Enter button. You see a corner mark on the screen; this defines one corner of the box.

4.Press the side of the Enter button to drag the square to where you want the opposite corner of the box to be.

5.Press down in the center of the Enter button. You see the box outlined on the screen.

You can continue placing boxes on the screen by repeating steps 2 through 5.

54Using the Projector