note
You won’t be able to view images on a separate monitor when the DVI port is in use.
Connecting to a
Your PowerLite projector is capable of remapping input resolutions up to 1600 × 1200 pixels. Since 1280 × 1024 pixels is the default resolution for most leading workstations, your projector is ideal for displaying workstation video output.
There is no standard for workstation video output. Workstations that follow the SXGA standard and use the HD15 (standard VGA) connector won’t need an adapter cable or any special connection device. However, your system may vary; contact your computer dealer if you need help connecting your workstation.
Connecting to a DVI Video Source
The projector’s Digital Visual Interface (DVI) receives pictures directly from your computer in digital format. This lets the projector display images of greater clarity than can be achieved using a standard analog VGA connection.
To project images in digital video format, follow these steps:
1. Connect the computer’s DVI cable to the projector’s DVI port.
slide switch to left
|
| Computer 1 |
| |
DVI port |
|
|
|
|
| Computer 2 /Component Video |
| ||
R/Cr/Pr | G/Y | B/Cb/Pb | H/C Sync V Sync | |
Remote |
| Mouse/Com | Audio | |
|
|
| ||
Video | ||||
Monitor Out | Stack Out |
| ||
2.Using the tip of a pen or a small screwdriver, slide the DVI/VGA interface switch to the left. (If you need to use the projector’s VGA port again, be sure to slide the switch back to the right.)
If you want to connect audio for this computer, you can use the Audio port on the back of the projector.
34Setting Up the Projector