Loading Roll Paper
1.Remove the tape and protective paper from the end of the roll. Then insert the holders into the roll of paper as shown.
2.Make sure the end of the paper is cut straight across, with 90° corners. If the end is cut diagonally, you may have problems feeding the paper.
3.If the paper curls at the end, fold a sheet of paper over the end and roll it backward to uncurl it.
Avoid touching the printable surface of the roll paper.
4.Remove any paper that’s in the sheet feeder at the top of the printer. Then remove the paper support, lower the output tray, and turn on the printer.
Note: You can load and print on roll paper with the paper support (and sheets) in place. However, you may find it easier to remove them.
5.Make sure the adjust lever is set to the m position.
34 Printing on Roll Paper, CDs, DVDs, and Card Stock