6.When you’re finished, close any open windows and click Back to return to the Options Menu.

7.Click Install Printer Information Center, then follow the on-screen instructions.

8.At the Options Menu, click Exit.

9.When you see the registration screen, register your printer with EPSON as instructed. Remove the CD-ROM and keep it in case you need to reinstall any software later.

10.Restart your computer if prompted. You’re ready to print.

Installing Printer Software on

Windows 2000

Before you start, make sure your printer is set up, connected to your computer, and turned on, as described on the Start Here sheet. Installation takes place in several phases. Follow the instructions in the two sections below, first to install your printer driver, and then to install additional software.

Installing the Printer Driver for Windows 2000

1.Turn on your computer.

2.Wait for Windows to detect your printer connection and display a screen like this:

Don’t click any buttons on the screen yet.

Note: If this screen doesn’t appear, make sure your printer is turned on and connected.

3.Put the EPSON CD-ROM in your CD-ROM or DVD drive and wait a few seconds for the CD-ROM to be recognized.

4.Click Next.

Installing Your Printer Software 69