Selecting Roll Paper Settings

Before you print on roll paper, make sure the paper is loaded correctly, as described on page 34. If you want to cut your photos automatically, install the automatic roll paper cutter and basket as described on page 36.

Then follow the steps in the next sections to select your roll paper settings on Windows or Macintosh.

Note: You can’t print on roll paper when you’re using Mac OS X applications.

Windows

Start by opening your photo file and resizing it as necessary. Then follow these steps:

1.Open the File menu and click

Print. Then click Properties or Preferences:

2.Choose Photo or Best Photo as the Quality Type.

3.Choose Roll or Roll Paper as the Paper Source. The Roll Paper Options window pops up as shown:

4.If you installed the cutter, select one of the following Auto Cutter settings:

■For the cleanest edge, select Normal Cut.

■To save paper, select Paper-Saving Cut. You may see a sliver of the previous or next image on your photos.

■To operate the cutter manually, select Manual Cut. This allows you to send multiple print jobs without cutting between jobs.

5.Select Cut Sheet Mode unless you’re printing a banner. Then click OK.

Note: If you’re using Film Factory with roll paper, select Roll Paper or Roll Paper (No Margins) as the Paper setting. To select cutting and other roll paper options, click Properties. Don’t change any other printer settings.

Printing on Roll Paper, CDs, DVDs, and Card Stock 39