4.Open the cartridge cover.
5.Press in the tab on the back end of the empty cartridge to unlock it. Then squeeze both tabs, lift the cartridge out of the printer, and dispose of it carefully.
6.Remove the new cartridge from its package.
Caution: Don’t touch the green circuit board on the back of the cartridge; you may inhibit normal operation and printing.
7.Slide the new cartridge into its slot. The side with the green circuit board goes in the back of the slot.
8.Press the cartridge down until it clicks into place.
9.If you need to replace any other ink cartridges, repeat steps 5 through 8. Then close the cartridge cover.
10.Close the printer cover and press the H ink button. The printer begins charging the ink delivery system.
The lights flash and the printer makes noise. Charging takes about a minute. When it’s finished, the green P power light stops flashing and stays on, and the red H ink light turns off.
Caution: Never turn off the printer while the green P power light is flashing, unless the printer hasn’t moved or made noise for more than 5 minutes.
62 Maintaining Your Printer