If the paper is crooked, press the z roll paper button and hold it for three seconds to back the paper all the way out.
Then turn the roll paper holder knobs to roll up the paper. Press the m paper button to clear the paper out error. Repeat steps 7 through 9 to reload the paper.
Continue with the instructions below to install the roll paper cutter and basket.
If you don’t want to install the cutter, follow the instructions on page 39 to print on roll paper.
Installing the Roll Paper Cutter and Basket
1. Make sure the printer is turned off, then lower the output tray.
2. Rest the cutter on the output tray. Then press down on the cutter and push it into the printer.
3. To use the basket, move the printer to the edge of the table or desk.
36 Printing on Roll Paper, CDs, DVDs, and Card Stock