Epson 960 Removing Your Photos and Paper

6.Select Cut Sheet Mode unless you’re printing a banner.

7.Click OK. Then open the File menu and click Print.

8.Select one of the following as the Media Type option, depending on the type of paper you’re using:

■Premium Semigloss Photo Paper

■Premium Luster Photo Paper

■Premium Glossy Photo Paper

9.Select Quality (for higher print quality) or Speed (for faster printing) using the slider. Then click Print.

Continue with the steps in the next section to remove your photos.

Removing Your Photos and Paper

After your photos are printed and cut, you can either send another print job or remove the roll paper from the printer.

1. When the printer stops, press and release the z roll paper button to cut and eject the last photo.

If you’re not using the cutter, cut the paper on the printed line, then press and release the z roll paper button to feed the paper back into printing position.

2. When you’re finished printing on roll paper, you need to “unload it” from the printer. Press the z roll paper button and hold it for three seconds. The paper feeds backwards out of the printer.

You can also set the adjust lever to the ! position, then turn the knobs to roll up the paper. Make sure you return the adjust

lever to the m position after you remove the paper.

Printing on Roll Paper, CDs, DVDs, and Card Stock 41