■Never spill liquid of any kind on the CX11N.
■Except as specifically explained in the documentation, do not attempt to service this product yourself. Opening or removing those covers that are marked Do Not Remove may expose you to dangerous voltage points or other risks. Refer all servicing in those compartments to a qualified service representative.
■Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and may require repair by a qualified service representative.
When Using the CX11NF With Telephone EquipmentWhen using the CX11NF with telephone equipment, follow these basic safety precautions to reduce the risk of fire, electric shock, and injury:
■Do not use the CX11NF near water.
■Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning.
■Do not use the telephone to report a gas leak in the vicinity of the leak.
Caution:
Be sure the telephone’s AC power cord meets the relevant local safety standards.
Use only the power cord that comes with the product and don’t use the cord with other equipment. Use of another cord may result in fire or electric shock.
Caution:
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Laser Safety LabelsWarning:
The performance of procedures and adjustments other than those specified in the CX11N’s documentation may result in hazardous radiation exposure.
Your CX11N is a Class 1 laser product as defined in the IEC60825 specifications. The label shown is attached to the back of the printer in countries where required.
132 Notices