Sawgrass Technologies, Inc. SubliJet IQ® Getting Started Guide for the EPSON Stylus D88
Before you Begin
It is crucial that the OEM ink supplied with your printer is installed before you attempt to install your SubliJet IQ™ inks. This allows for two things: First, it primes the ink delivery system, ensuring that the SubliJet IQ™ ink will load more easily. Second, it familiarizes you with the basic operation of your printer. Please see the EPSON Stylus D88 Printer User’s Guide for instructions on installation.
Quick Connect II™ Set-up for the D88
For more detailed instructions please refer to the Video Installation Guide on your PowerDriver™ CD
1.Check to ensure that you have all of the components necessary to setup your Quick Connect II™ system.
Components
1.Ink Cartridge + tubes
2.1 x Long Tube Grip
3.1 x Short Tube Grip
4.4 x Ink Bags
5.Small primer bottle
6.Ink Box
7.Chips
8.Foam Block
9.Power Driver CD (Not Shown)
10.Printer
2.Place the Quick Connect II box on a level surface next to where your printer is going to be placed. It should be on the left hand side of your printer with the clamps facing towards the front.
Your ink bags should never be elevated above the print head. Keeping the bags beside the printer at the same level assures the ink delivery system will operate properly.
9
