When the list is correct, you can run diagnostic tests on each device. If you do not want to test a device, you can remove it from the list. You can also add a device to the list.

Deleting Tests

To remove devices from the Items Detected list so the System diagnostics program cannot test them, follow these steps:

1.Press m to select Delete Tests. You see the Delete menu, such as the following:

System BoardNumeric CoprocessorSystem MemoryDiskette Drive AHard Disk Drive #lSerial Port COMlSerial Port COM2Parallel Port LPTlLPTl Printer Test

2.Press m or Ir) to highlight the device you want to delete and press (Enter. The device is removed from the Delete menu. You can delete as many devices as you want.

3.When you are finished deleting devices, press It) to select Execute and see the “Running Tests” section.

Running System Diagnostics A-3