Epson EISA Desktop Running Tests, run, IEnter, 0- Exit, CHECK MEND, read check, want to run, Press It) or, System Board, System Memory, 1 - Seek check, Diskette Drive A

Running TestsFollow these steps to run a test from the Execute menu:

1.Press It) or m to select Execute. You see the Execute menu, such as the following:

System Board

Numeric Coprocessor

System Memory

Diskette Drive A

Hard Disk Drive #l

Serial Port COMl

Serial Port COM2

Parallel Port LPTl

LPTl Printer Test

2.Press m or m to highlight the device you want to test and press m. You seethe Repeat prompt:

How often to repeat test? 1

3.If you want to run the test once, press IEnter To run the test more than once, type the number of times you want to run it and press IEnter

4.If there is only one test for a device, the program begins testing immediately. If there is more than one test for the device, you see a submenu of test selections, such as the following:

HARD DISK DRIVE(S) AND CONTROLLERCHECK MEND1 - Seek check

2- W r i t e , read check

3- Read, verify check4- Run all above checks0- Exit

Running System Diagnostics A - S