Epson EISA Desktop Performing the Configuration Steps, and, View, Save, exit, Step, boards, Step 1:, Step 3:, Running, Add or remove, edit, details, S t e p 2 :, S t e p 4 :

Performing the Configuration Steps

Follow these steps to configure your computer:1.At the Main Menu, select Configure computer. You see this menu:S t e p s i n c o n f i g u r i n g y o u r c o m p u t e r

Step 1:	Important EPSON EISA
	c o n f i g u r a t i o n i n f o r m a t i o n
S t e p 2 :	Add or remove			boards
Step 3:	View	or	edit	details
S t e p 4 :	E x a m i n e r e q u i r e d s w i t c h e s
S t e p 5 :	Save	and	exit

2.Select Step 1 and read the information displayed on your screen about configuring your system. If you want to print any of the screens, press the [K] key.

3.Select Step 2 and follow the instructions on the screen to add, remove, or move option cards in your configuration and copy any necessary CFG files to your Reference 1 diskette. See the next section for more information.

4.Select Step 3 and follow the instructions on the screen to view or edit the details of your option cards and your system board. See “Defining the Configuration Settings” below for more information.

5.Select Step 4 if you want to view the switch or jumper settings you may need to change on any ISA cards you will install. Follow the instructions on the screen.

6.When you are finished configuring your system, select Step 5 to save the configuration in your computer’s CMOS and reboot the system. You can also exit the program without saving the configuration, if necessary. Follow the instructions on the screen.

Running System Configuration 2 - 9