Epson EISA Desktop Changing the Country Code, Press any key to reboot, Change country code? (Y/N), At the, 1.Insert the Reference 1 diskette in drive A and log onto drive A

Changing the Country Code

If you need to change the country code for your system’s keyboard driver and configuration information, you can run the CHGCTR utility. Follow these steps:

1.Insert the Reference 1 diskette in drive A and log onto drive A.

2.At the A> prompt, type CHGCTR and press [Enter. You see the information screen for the Change Country Code utility followed by this prompt:

Change country code? (Y/N)

3.If you want to keep the current country code, press IN). You see a message telling you that the program still must update your files. Then the program copies the files. Go to step 4.

If you want to select another country code, press [VI. You see a list of the function keys to press to select a different code. Press the appropriate function key for the country code you want. The program copies the files and displays a message confirming the change.

4.When you see the following message, press any key to reboot the system and run the System Configuration program:

Now you should reboot the system to run the appropriate AUTOEXEC.BAT and CONFIG.SYS files and start the System Configuration program.

Press any key to reboot . . .

After a moment, you see the System Configuration title screen. If you want to run that program now, see Chapter 2 for instructions.

l-10Setting Up Your System