Changing or Deleting a Password

You can change or delete a password when you see the Enter password prompt. Follow these steps:

1. Turn on the computer. You see the prompt to enter a password.

2. To change the password, type the current password followed by a forward slash (/). After the slash, enter the new password you want to use. For example, if your current password is 123 and you want to change it to ABC, type:

1 2 3 / A B C

To delete the password, type the current password followed only by a forward slash (/), for example:

1 2 3 /

The screen does not display what you type.

3.Press IEnter You see a message confirming the change or deletion and then the computer loads your operating system.

Using a Password in Network Server Mode

If you are using your system as a network server, you may want to prevent unauthorized users from entering commands at the keyboard. To provide this security, you can enable a power-on password in network server mode using the System Configuration program.

Using Your Computer 3 - 3