Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW1000 U p.12, p.12, p.12, p.55, p.44, area p.13, [RS-232C]port, • Security lock, •Lamp cover p.46, •Power inlet p.14, • [SCART] input port, • [Trigger out] port

1 64

Download 64 pages, 3.48 Mb

Part Names and Functions

Rear

• [SCART] input port	p.12
Connects to the component

•[Component] input port p.12

Connects to the component (YCbCr or YPbPr) out port of the video equipment.

(YCbCr or YPbPr) out port or D
out port of the video equipment.
• [Trigger out] port
When the projector power
is turned on, a 12 V DC
signal is output from this port.
When the projector's power is
turned off or a problem with
operation occurs, the output
becomes 0 V to send the
projector's power ON/OFF
status to an external device.
• [Video] input port	p.12
Connects to general video out
ports of the video equipment.
• [S-Video] input port	p.12
Connects to the S-Video out ports of
the video equipment.

•[PC] input port p.12

Connects to the RGB out port of the computer.

• Main power switch • p.14•Power inlet p.14

Connects the power cable.

• [HDMI] input port p.12

Connects to video equipment or a computer that is HDMI- compatible.

• Remote control light-receivingarea p.13

Receives signals from the remote control.

• Security lock p.55[RS-232C] port

Connects the projector to a computer using an RS-232C cable. This port is for control use and should not be used by the customer.

Base

•Suspension bracket fixing points (4 points) p.48

Install the optional ceiling mount here when suspending the projector from a ceiling.

•Lamp cover p.46

Open this cover when replacing the lamp inside.

•Air filter (air intake vent) p.44, 46

Prevents dust and other foreign particles from being drawn into the projector.

It should be cleaned periodically.

8

Contents

Page About the Manuals and Notations Used Checking the Components Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [SCART] input port p.12 •[Component] input port p.12 • [Trigger out] port • [Video] input port Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Remove the lens cover Turn the power on Connect the powercable Turn on the main power switch Turn the power on for the connected equipment When the expected images are not projected Turning the power off Adjusting the Projection Screen Focus adjustment Fine adjustments to image size (Zoom adjustment) Projection imageFinepositionadjustments(Lensto imageshift) size (Zoom Correcting projector tilt Displaying a test pattern Basic Image Quality Adjustments Select Menu Operations Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Save Memory Load Memory Erase Memory Configuration Menu Functions Displaying a menu Selecting a menu item Changing settings When setting is complete Page Resolution Sync Info Color Mode *1 Brightness *2 Contrast *2 Color Saturation *2 Tint *2 Brightness Control *2 Auto Iris *3 Aspect *1 Zoom Size *1 Zoom Caption Pos. *1 Progressive*1 Motion Detection *1 Noise Reduction *1 Output Scaling *1 Setup Level *1 HDMI Video Range*1 Direct Power On Sleep Mode Child Lock Operation Lock Projection Display Input Signal Language Reset All Reset Memory Reset Lamp Hours Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported" is displayed ■The message "No Signal" is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Computer image (analog RGB) Input signal from the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page Page Page General Notice: