Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW1000 U Troubleshooting, ■ Power does not turn on, Problems when projection starts, Problems with the remote control, ■The remote control does not work

1 64

Download 64 pages, 3.48 Mb

Problem Solving

Problems when projection starts■ Power does not turn on

Have you pressed the [Power]	Press on the remote control or	on the projector's control
button?	panel.
Is "Child Lock" set to "On"?	If the "Child Lock" menu command is set to "On", press			on the
	projector's control panel for about 3 seconds or press			on the
	remoto control to turn the power on.
	"Settings" - "Child Lock" p.33
Is "Operation Lock" set to "On"?	If the "Operation Lock" menu command is set to "On", all buttons
	on the projector’s control panel are disabled. Press		on the
	remote control.
	"Settings" - "Operation Lock" p.33
Are all of the indicators	Disconnect the power cable and then reconnect it.		p.14
switched off?	Check the circuit breaker to see if power is being supplied.
Do the indicators turn off and on	Turn the power off, disconnect the power cable and then reconnect
when the power cable is	it. If this does not solve the problem, there may be a problem with
touched?	the power cable. Then contact your local dealer or the nearest
	address provided in the World-Wide Warranty Terms.			Inquiries

Problems with the remote control■The remote control does not work

Is the remote control light-	Face the remote control towards the remote control light-receiving
emitting area facing towards the	area.
remote control light-receiving	The operating angle for the remote control is approximately ±30°
area when it is operated?	horizontally and approximately ±30° vertically.	p.13

Is the remote control too far	The operating range for the remote control is approximately 10m.
from the projector?	p.13

Is direct sunlight or strong light	Set the projector up in a location where strong light will not shine
from fluorescent lamps shining	onto the remote control light-receiving area.
onto the remote control light-
receiving area?

Are the batteries dead, or have	Insert new batteries, while making sure that they face correctly.
the batteries been inserted	p.13
correctly?

Troubleshooting

43

Contents

Page About the Manuals and Notations Used Checking the Components Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [SCART] input port p.12 •[Component] input port p.12 • [Trigger out] port • [Video] input port Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Remove the lens cover Turn the power on Connect the powercable Turn on the main power switch Turn the power on for the connected equipment When the expected images are not projected Turning the power off Adjusting the Projection Screen Focus adjustment Fine adjustments to image size (Zoom adjustment) Projection imageFinepositionadjustments(Lensto imageshift) size (Zoom Correcting projector tilt Displaying a test pattern Basic Image Quality Adjustments Select Menu Operations Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Save Memory Load Memory Erase Memory Configuration Menu Functions Displaying a menu Selecting a menu item Changing settings When setting is complete Page Resolution Sync Info Color Mode *1 Brightness *2 Contrast *2 Color Saturation *2 Tint *2 Brightness Control *2 Auto Iris *3 Aspect *1 Zoom Size *1 Zoom Caption Pos. *1 Progressive*1 Motion Detection *1 Noise Reduction *1 Output Scaling *1 Setup Level *1 HDMI Video Range*1 Direct Power On Sleep Mode Child Lock Operation Lock Projection Display Input Signal Language Reset All Reset Memory Reset Lamp Hours Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported" is displayed ■The message "No Signal" is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Computer image (analog RGB) Input signal from the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page Page Page General Notice: