Problem Solving

■The message "Not Supported" is displayed

Are the image signal format

If a composite video or S-Video is being input

settings correct?

If projection does not occur when the "Video Signal" menu

 

command is set to "Auto", select the signal format that matches the

 

signal source.

 

"Settings" - "Input Signal" - "Video Signal" p.34

If the signal source is connected to the [Component] or [D] input port

If projection does not occur when the "Component" in the "Input Signal" menu command is set to "Auto", set the signal format that matches the signal that is being projected from the connected

equipment. "Settings" - "Input Signal" - "Component" p.34

Does the mode match the

Use the "Resolution" menu command to check the signals being

frequency and resolution of the input, and check the "List of Supported Monitor Displays" to make

image signals?

sure that the signals are compatible.

 

 

"Info" - "Resolution" p.29

 

Only when projecting

 

"List of Supported Monitor Displays" p.49

 

computer images

 

 

 

■The message "No Signal" is displayed

Are the cables connected

Check that all of the cables required for projection are securely

correctly?

connected.

 

p.12

 

 

 

Has the correct video input port

Press

,

,

,

or

on the remote control or

been selected?

on the projector’s control panel to change the image source.

 

p.15

 

 

 

 

 

Is the power for the connected

Turn the power on for the devices.

 

equipment turned on?

 

 

 

 

 

 

Are the image signals being

If the image signals are only being output to the computer's LCD

output to the projector?

monitor, you need to change the output.

 

Only when projecting

For some computer models, when the image signals are output

externally, they no longer appear on the LCD monitor.

images from a laptop

Computer documentation, under a title such as "External

computer or computer

output" or "Connecting an external monitor"

with a built-in LCD

 

 

 

 

 

 

screen

If the connection is made while the power is already turned on, the

 

function [Fn] key that switches the computer's video signal to

 

external output may not work. Turn the power for the projector and

 

the computer off and then back on again.

p.14

■Images are fuzzy or out of focus

Has the focus been adjusted

Adjust the focus.

p.16

correctly?

 

 

 

 

Is the lens cover still attached?

Remove the lens cover.

 

 

Is the projector at the correct

The recommended distance from the projector to the screen is

distance?

within 87 to 956 cm (2.8 to 31.4 ft.) for a screen size of 16:9, and

 

106 to 1170 cm (3.5 to 38.4 ft.) for a screen size of 4:3. Set up the

 

projector so that the projection distance is within this

 

range. p.10

 

 

 

 

Troubleshooting

39