Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW1000 U ■Images appear dark, ■Image colours are not right

1 64

Download 64 pages, 3.48 Mb

			Problem Solving

Has the correct resolution been			Set the computer so that the signals that are output are compatible
selected?			with this projector.
			"List of Supported Monitor Displays" p.49
	Only when projecting		"List of Supported Monitor Displays" p.49
	Only when projecting		Computer documentation
	computer images		Computer documentation
	computer images

■Image colours are not right

Are the image signal format	If a composite video or S-Video is being input
settings correct?	If projection does not occur when the "Video Signal" menu
	command is set to "Auto", select the signal format that matches the
	signal source.
	"Settings" - "Input Signal" - "Video Signal" p.34

If the signal source is connected to the [Component] or [D] input port

If projection does not occur when the "Component" in the "Input Signal" menu command is set to "Auto", set the signal format that matches the signal that is being projected from the connected

equipment. "Settings" - "Input Signal" - "Component" p.34

Are the cables connected			Check that all of the cables required for projection are securely
correctly?			connected.	p.12

Has the image contrast			Use the "Contrast" menu command to adjust the color.
been adjusted correctly?			"Image" - "Contrast" p.30

Has color been adjusted			Use the "Advanced" menu command to adjust the colour.
appropriately?			"Image" - "Advanced" p.30

Have the colour intensity and			Use the "Color Saturation" and "Tint" menu commands to adjust
tint been adjusted correctly?			the colour and tint.
			"Image" - "Color Saturation", "Tint" p.30
	Only when projecting

	images from a video
	source

■Images appear dark

Has the image brightness been	Use the "Brightness" menu commands to make the adjustments.
adjusted correctly?	"Image" - "Brightness" p.30

Has the image contrast	Use the "Contrast" menu command to adjust the color.
been adjusted correctly?	"Image" - "Contrast" p.30

Is the lamp due for	When the lamp is nearly due for replacement, the images will
replacement?	become darker and the colour quality will become poorer. When		Troubleshooting
	this happens, the lamp should be replaced with a new one.	p.46	Troubleshooting
	this happens, the lamp should be replaced with a new one.	p.46

41

Contents

Page About the Manuals and Notations Used Checking the Components Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [SCART] input port p.12 •[Component] input port p.12 • [Trigger out] port • [Video] input port Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Remove the lens cover Turn the power on Connect the powercable Turn on the main power switch Turn the power on for the connected equipment When the expected images are not projected Turning the power off Adjusting the Projection Screen Focus adjustment Fine adjustments to image size (Zoom adjustment) Projection imageFinepositionadjustments(Lensto imageshift) size (Zoom Correcting projector tilt Displaying a test pattern Basic Image Quality Adjustments Select Menu Operations Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Save Memory Load Memory Erase Memory Configuration Menu Functions Displaying a menu Selecting a menu item Changing settings When setting is complete Page Resolution Sync Info Color Mode *1 Brightness *2 Contrast *2 Color Saturation *2 Tint *2 Brightness Control *2 Auto Iris *3 Aspect *1 Zoom Size *1 Zoom Caption Pos. *1 Progressive*1 Motion Detection *1 Noise Reduction *1 Output Scaling *1 Setup Level *1 HDMI Video Range*1 Direct Power On Sleep Mode Child Lock Operation Lock Projection Display Input Signal Language Reset All Reset Memory Reset Lamp Hours Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported" is displayed ■The message "No Signal" is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Computer image (analog RGB) Input signal from the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page Page Page General Notice: