Configuration Menu Functions

"Image" menu

Displayed for input sources other than computer

Color Mode *1

Six different settings can be selected for the Color Mode, to match the images being projected or the

projection environment. p.18

Brightness *2

Adjust this when the output level of the connected equipment is weak and you feel that images are dark.

Contrast *2

Adjusts the difference between bright and dark areas.

When the contrast is increased, images with greater modulation are obtained.

Color Saturation *2

This adjusts the colour intensity for the images.

Tint *2

(Adjustment is only possible when composite video and S-Video signals in NTSC format are being input.)

This adjusts the image tint.

Sharpness *2

This adjusts the image sharpness.

Standard

The adjustment results are applied to the entire image.

Advanced

This can be used to adjust a specific region. p.23

Abs. Color Temp.*2

This adjusts the overall tints of the images. p.20

Skin Tone *2

This adjusts the skin tones of people who appear in the images. p.20

Advanced

Gamma *1

This adjusts gamma. You can select a value, or make adjustments while viewing an image or a graph. p.20

RGB *1

This lets you adjust the offset and gain for each of the R/G/B colour components. p.22

RGBCMY *1

This lets you adjust the hue and saturation for each of the R/G/B/C/M/Y colour components. p.22

 

*1

The setting values are stored separately for each image source and signal type.

30

*2

The setting values are stored separately for each image source and colour mode setting.