Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson EMP-TW1000 U Configuration Menu Functions, Displaying a menu, Selecting a menu item, ■Full menu, ■Line menu

1 64

Download 64 pages, 3.48 Mb

Configuration Menu Functions

The configuration menus can be used to make a variety of adjustments and settings involving image quality and input signals.

The following two types of menu are available.

■Full menu

All items in the configuration menu can be checked while the settings are being made.

Top menu			Sub-menu

■Line menu

Some of the items in the "Image" menu in the Configuration menu can be adjusted.

This menu is useful for viewing the effects of adjustments in the images being projected while the adjustments are being made.

Navigation Bar

Refer to "Using the configuration menus"( p.26) for details on menu operations.

The Configuration menu can be used to change the colour pattern and display position of the menus.

TIP	"Settings" - "Display" - "Menu Position", "Menu Color"

Using the configuration menus

Displaying a menu

Full menu: Press

Line menu: Press

Selecting a menu item

Use or to select a menu item, then press .

Contents

Page About the Manuals and Notations Used Checking the Components Table of Contents ■ Problem Solving ■ Maintenance ■ Optional Accessories / Consumables ■ List of Supported Monitor Displays ■ Specifications Features of the Projector Page Part Names and Functions Page • [SCART] input port p.12 •[Component] input port p.12 • [Trigger out] port • [Video] input port Appearance Setting up Lens shift adjustment Projection methods Connecting Image Sources Preparing the Remote Control Using the remote control Remove the lens cover Turn the power on Connect the powercable Turn on the main power switch Turn the power on for the connected equipment When the expected images are not projected Turning the power off Adjusting the Projection Screen Focus adjustment Fine adjustments to image size (Zoom adjustment) Projection imageFinepositionadjustments(Lensto imageshift) size (Zoom Correcting projector tilt Displaying a test pattern Basic Image Quality Adjustments Select Menu Operations Image Quality Adjustments Advanced Colour Adjustments Adjusting from the gamma correction values Customized ("Adjust it from the image") ("Adjust it from the graph") Offset Gain Hue Saturation Examining Image Quality Further Page Save Memory Load Memory Erase Memory Configuration Menu Functions Displaying a menu Selecting a menu item Changing settings When setting is complete Page Resolution Sync Info Color Mode *1 Brightness *2 Contrast *2 Color Saturation *2 Tint *2 Brightness Control *2 Auto Iris *3 Aspect *1 Zoom Size *1 Zoom Caption Pos. *1 Progressive*1 Motion Detection *1 Noise Reduction *1 Output Scaling *1 Setup Level *1 HDMI Video Range*1 Direct Power On Sleep Mode Child Lock Operation Lock Projection Display Input Signal Language Reset All Reset Memory Reset Lamp Hours Problem Solving warning/problem normal Problems relating to images ■No images appear Have you pressed the [Power] button Is the main power switch ■The message "Not Supported" is displayed ■The message "No Signal" is displayed ■Images are fuzzy or out of focus ■Interference or distortion appear in images ■Image is truncated (large) or small ■Image colours are not right ■Images appear dark ■Projection stops automatically Problems when projection starts ■ Power does not turn on Problems with the remote control ■The remote control does not work Maintenance Air filter replacement period Lamp replacement period Appendix Replacing the air filter Replacing the lamp Resetting the lamp operating time Page Optional Accessories / Consumables List of Supported Monitor Displays Computer image (analog RGB) Input signal from the [HDMI] input port Specifications ■Angle of tilt ■RS-232Ccable layout DECLARATION of CONFORMITY FCC Compliance Statement For United States Users WARNING Glossary Page Index Page Page Page Page General Notice: