Configuration Menu Functions
List of configuration menus
When no image signals are being input, the "Image" menu and the "Signal" menu cannot be adjusted. Also, the items displayed in the "Image" menu, the "Signal" menu and the "Info" menu will vary depending on the type of image signals that are being projected.
Displayed for input sources other than computer | * This is displayed in the line menu. |
Image
Color Mode | p.30 |
Brightness | p.30 |
Contrast | p.30 |
Color Saturation | p.30 |
Tint | p.30 |
Sharpness | p.30 |
Abs. Color Temp. | p.30 |
Skin Tone | p.30 |
Dynamic, Living Room, Natural, Theatre,Theatre Black 1, Theatre Black 2
*
*
*
*
* Standard
* |
| Advanced Thin Line Enhancement, Thick Line | Enhancement |
|
| Vert. Line Enhancement, Horiz. Line Enhancement | |
|
|
*Gamma 2.0, 2.1, 2.2, 2.3, 2.4
Advanced | p.30 |
Brightness Control | p.31 |
High, Low
Customized Adjust it from the image Adjust it from the graph
Reset
Auto Iris | p.31 |
Reset | p.31 |
On, Off | RGB | Offset R, G, B | |
Yes, No |
| Gain R, G, B | |
RGBCMY | R (Hue/Saturation), G (Hue/Saturation), | ||
|
B (Hue/Saturation), C (Hue/Saturation),
M (Hue/Saturation), Y (Hue/Saturation)
Displayed for input sources other than computer
Only displayed for Computer input
(does not appear when signals from the [HDMI] input port are being input)
Signal
Aspect | p.31 | Auto, Normal, Full, Zoom, Wide |
Zoom Size | p.31 |
|
Zoom Caption Pos. | p.31 |
|
Tracking | p.31 |
|
Sync. | p.31 |
|
Position | p.31 |
|
Auto Setup | p.31 | On, Off |
Progressive | p.32 | Off, Video, Film/Auto |
Motion Detection | p.32 |
|
Noise Reduction | . 1 | Off, NR1, NR2, NR3 |
p.32 | ||
Output Scaling | . 1 | Auto, 100%, 98%, 96%, 94%, 92% |
p.32 | ||
Setup Level | p.32 | 0%, 7.5% |
EPSON Super White | p.32 | On, Off |
HDMI Video Range | p.33 | Normal, Expanded |
Reset | p.33 | Yes, No |
28