Configuration Menu Functions

"Image" menu

Only displayed for component video/composite video/S-Video input

Only displayed for RGB-video/Computer input

 

Picture Quality

Default setting

 

 

 

Input Adjustment *1

These settings can be adjusted if the output level from the connected equipment is weak and the images appear dark. The two settings cannot be made simultaneously. You can only select one of them to be adjusted.

•White Level/Black Level:These adjust the dark and light areas of images

White Level: Adjusts the brightness of bright shades without changing the black level.

When the setting is changed to the - side, bright areas become clearer. Black Level: Adjusts the brightness of dark shades without changing the white level.

When the setting is changed to the + side, dark areas become clearer.

•Input Level/Contrast:Adjusts the overall brightness of the images.

Input Level: Adjusts the overall brightness of the images.

 

When the setting is changed to the + side, the images appear brighter

 

overall.

Contrast:

Adjusts the difference between bright and dark areas.

 

When the contrast is increased, images with greater modulation are

 

obtained.

Brightness *2

 

White Level/ Black Level

White Level: Median value (0)

Black Level: Median value (0)

Input Level: Median value (0)

Contrast: Median value (0)

The brightness of the images can be adjusted.

If projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting.

If the setting is reduced to 0 or less, power consumption can be reduced by up to approximately 25%.

Color Intensity *1

This adjusts the colour intensity for the images.

Tint *1

(Adjustment is only possible when composite video and S-Video signals in NTSC format are being input)

This adjusts the image tint.

Sharpness *1

This adjusts the image sharpness.

Tracking *1

5 (Depends on color mode)

Median value (0)

Median value (0)

0

This adjusts the images if vertical stripes appear in the images.

Depends on input

 

 

signal

 

 

Sync. *1

This adjusts the images if flickering, fuzziness or interference appear in the images.

•Flickering and fuzziness may also appear in images when the brightness, contrast, sharpness and keystone correction settings are adjusted.

•Clearer adjustments can be obtained if you adjust the tracking first and then adjust the sync.

Depends on input signal

16

*1 The setting values are stored separately for each image source and signal type.

*2 The setting values are stored separately for each image source and colour mode setting.