Connects to the RGB port of a computer.

Part names and Functions

Rear

•[S-Video] port Setup Guide

Inputs an S-Video signal to the projector from

other video equipment.

•[InputB] port

Setup Guide

•[InputA] port Setup Guide

Connects to the component video (YCbCr or YPbPr) ports or RGB ports of other video equipment.

•[D4] port Setup Guide

Connects to the component

(YCbCr or YPbPr) ports or D port of other video equipment.

(Japan only)

•[Trigger out] port p.20

When the projector power is turned on, a 12 V DC signal is output from this port. When the projector's power is turned off or a problem with operation occurs, the output becomes 0 V to communicate the projector's power ON/OFF status to an external device.

•[Control (RS-232C)] port p.25

Connects the projector to a computer using an RS-232C cable when using the Cinema Color Editor.

•[USB] port p.25

Connects the projector to a computer using a USB cable when using the Cinema Color Editor.

•Remote control light-receiving

area Setup Guide

Receives signals from the remote control.

•Security lock ( ) p.47

•[Video] port Setup Guide

Connects to general video ports of other video equipment.

•Power inlet Setup Guide

Connects the power cable.

Base

•Air filter (air inlet) p.36, p.38

Prevents dust and other foreign particles from being drawn into the projector. It should be cleaned periodically.

•Suspension bracket fixing points (4 points)

p.41

Install the optional ceiling mount here when suspending the projector from a ceiling.

6