Part names and Functions
Buttons with no explanation function in the same way as the corresponding buttons on the projector's control panel. Refer to "Control Panel" for further details on these buttons.
•Remote control 
Setup Guide
Outputs remote control signals.
•Indicator 
Illuminates when remote control signals are being output.
•Menu button 
p.23
•Memory button 
p.12
Displays a selection menu for selecting memory settings.
•Select/Line menu button
• | buttons |
|
Press to select configuration menu and selection menu items and adjustment values and to adjust the zoom and focus.
•Pattern button 
Setup Guide 
Displays a selection menu for selecting a test pattern.
•Zoom button 
Setup Guide
•Blank button
The projected images switch off and on each time this button is pressed.
•
(Illumination) button
All buttons on the remote control illuminate when this button is pressed. The button illumination switches off automatically after about 10 seconds have passed.
Displays a selection menu for selecting the colour mode.
•Aspect button 
p.8
•Esc button 
p.23
Source
Setup Guide
•D4 button: Switches the input source to the projector's [D4] port. When you need to switch the input signal to match the equipment that is connected to the [D4] port, select the correct signal using the selection menu. The change will be reflected in
•InputA button: Switches the input
source to the projector's [InputA] port.the "Input Signal" menu.
When you need to switch the input signal to match the equipment that is connected to the [InputA] port, select the correct signal using the selection menu. The change will be reflected in the "Input Signal"
•InputB button: Switches the input source to the projector's [InputB] port.
•
source to the projector's [S- Video] port.
•Video button: Switches the input source to the projector's [Video] port.
•Focus button 
Setup Guide
5