Adjusting LCD Panel Adjustment
Vertical stripes may appear in the projected images. If these vertical stripes interfere with viewing of images, they can be adjusted by carrying out the following procedure.
Procedure
Note the following points when carrying out the procedure below.
•Note that once you adjust the "LCD Panel Adjustment", it will not return to the default setting even by the "Reset" or "All Reset". Carry out the adjustment only when vertical stripes interfere with viewing of images.
•Turn on the power and let the projector stand for approximately 10 minutes after the lamp turns on before starting the following procedure.
•The following adjustment can be carried out more effectively if the room is made dark beforehand.
•The adjustment can also be carried out without an image source connected.
•If the vertical stripes become a problem again while using the projector after the adjustment has been carried out, you can repeat the adjustment procedure to maintain clear images.
Press 
, then select "Setting" - "Operation" - "LCD Panel Adjustment" in that order.
Adjust the vertical stripe adjustment setting for each R/G/B colour component.
First select "Vertical Stripe
Adjustment R" and then press 
. The red tone adjustment screen will be displayed.
While checking the tone adjustment screen, adjust the settings starting from the one where the vertical stripes are most noticeable. If the stripes are most noticeable in the bright portions of the image, adjust the "Bright Color" setting first. After this, adjust the "Dark Color" setting to fix the vertical stripes in the darker portions of the image. Once both adjustments have been completed, select "Apply" and then
press 
.
|
| Dark portions |
| Bright portions |
|
| |||
|
|
|
|
|
|
|
|
|
|
Repeat steps 
and 
to adjust the "Vertical Stripe Adjustment G" and "Vertical Stripe Adjustment B" settings.
Once all adjustments have been completed,
press 
to exit the configuration menu.
40