Configuration Menu Functions

Only displayed for RGB-video/Computer input

 

Color Adjustment

Default setting

 

 

 

 

 

 

 

"Color Adjustment" cannot be selected when the colour mode is set to "sRGB".

 

Color Temp.

 

*2

 

 

 

 

 

 

 

 

 

 

 

 

 

•Color Temp. : The colour temperature can be selected from three settings in order to

 

 

 

Low (5500K)

 

 

 

adjust the overall tint of the images.

p.10

(Depends on colour

 

 

 

 

 

 

mode)

 

 

 

•Flesh Tone

: This adjusts the flesh tones of people who appear in the images.

 

 

 

 

 

 

5 (Depends on color

 

 

 

p.10

 

 

mode)

 

 

 

RGB *1

 

 

 

 

 

 

 

This adjusts the brightness of the dark, bright and intermediate areas of the images.

 

 

 

 

Offset

R/G/B: 0

 

p.10

 

 

 

 

 

 

 

Gain

R/G/B: 0

 

 

 

 

 

 

Gamma R/G/B: 2.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color Mode *1

 

 

Default setting

 

 

The Color Mode can be selected from five different settings in accordance with the

 

 

 

 

Living Room

 

images being projected.

p.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Memory: Standard

This can be used to save the current configuration menu settings and the aspect . p.12

Last Memory *1

This command causes images to be displayed back at their original settings if they have been adjusted according to settings that were loaded using the "Memory: Advance" command. To return images to their original settings, select "Yes".

 

Auto Setup *1

Default setting

 

 

 

 

This sets automatic adjustment to on or off in order to set whether the projector

 

 

 

 

 

automatically adjusts images to their optimum condition when the input signal is

ON

 

changed.

 

 

 

 

 

 

Configuration Menu

Reset

This returns all settings in the "Image" menu to their default settings, except for the settings that have been saved using the "Memory: Standard" command. The "Memory: Standard" settings can be reset using the

"Memory Reset" menu. p.22

*1 The setting values are stored separately for each image source and signal type.

*2 The setting values are stored separately for each image source and colour mode setting.

17