Configuration Menu Functions

Startup Screen

This sets whether the start-up screen (the image that is projected when projection starts)

 

is displayed (ON) or not displayed (OFF).

ON

If you change the setting, the new setting will take effect after the power has been turned

 

off and the cool-down period is complete.

 

 

 

 

Input Signal

Default setting

 

 

 

 

 

 

Video Signal

 

 

 

Sets the signal format in accordance with the video equipment that is connected to the

 

 

 

 

 

 

[Video] or [S-Video] port. If set to "Auto", the video signal format is set automatically.

 

 

 

If there is a lot of interference in the image, or if a problem such as no image being

Auto

 

projected occurs even though "Auto" has been selected, select the correct signal format

 

 

 

manually.

 

 

 

 

 

 

 

Input A

 

 

 

Change this setting depending on the type of signal that is being output from the video

 

 

 

YCbCr

 

equipment that is connected to the [InputA] port.

 

 

 

 

 

 

 

 

D4

 

 

 

Select "YCbCr" or "YPbPr " depending on the type of signal that is being output by

 

 

 

YCbCr

 

the source that is connected to the [D4] port.

 

 

 

 

 

 

 

 

 

 

 

Language

Default setting

 

 

This sets the display language for messages and menus.

 

 

 

English

 

 

 

 

(Varies depending on

 

 

country of purchase)

 

 

 

 

Reset

This returns all settings in the "Setting" menu to their default settings, except for the "LCD Panel Adjustment", "Input Signal" and "Language" settings.

Configuration Menu

21