Epson EMP-TW200H into memory, editing memory area names, Saving/loading memory settings, Saving adjustment values into memory, Saving customised settings into memory

Using Cinema Color Editor

Click

Saving customised settings into memory

Loads settings from a memory area

Saving adjustment values into memory

Saves adjustments

into a memorySavingarea customised settingsinto memory

Operates in the same way as the projector's Last Memory function. p.17

Note that you cannot use a memory which was registered with other projectors(EMP-TW200, EMP-TW500).

Memory list

Indicates the projector memory status.

(yellow): In use (grey): Not in use

Saving/loading memory settingsand editing memory area names Saving/loading memory settings and

editing memory area names"Memory Edit" allows you to easily carry out the following processes.

Saving projector memory settings into a computer as a memory data file

Loading memory data files from a computer into projector memory

This lets you store settings in the computer as much as you want without regard for the memory limitation of the projector (Standard:6, Advance:6), and load the settings into the projector's memory from the computer as needed.

Memory list

Saving adjustment values from the projector's memory onto the computer

Select a memory setting from the

memory list to save it onto the computer.

Click [Save in File].

Select the saving location, type in a filename and then click [Save].

If a file with the same name already exists, a message will be displayed.

Loading adjustment values from a saved file into projector memory

Select a memory number for loading from the memory list.

Click [File Read].

Select the file to be loaded in the file selection window, and then click [Open].

If the saved memory setting is selected, a message will be displayed.

28