Problem Solving
Has the correct resolution been selected?
Only when projecting computer images
Set the computer so that the signals that are output are compatible with this projector.
"List of Supported Monitor Displays" p.42, Computer documentation
Image colours are not right
Are the image signal format If a composite video
or 
settings correct?If projection does not occur when the "Video Signal" menu command is set to "Auto", select the signal format that matches the signal source. 
"Setting" - "Input Signal" - "Video Signal" p.21
If the signal source is connected to the [InputA] or [D4] port
Use the "Input Signal" menu command to set the signal format that matches the signal that is being projected from the connected equipment. 
"Setting" - "Input Signal" p.21
You can also press 
or 
on the remote control to select the
format. 
Setup Guide
Are the cables connected | Check that all of the cables required for projection are securely | |
correctly? | connected. | Setup Guide |
|
| |
Has the image Contrast | Use the "Contrast" or "White Level" menu command to adjust the contrast. | |
been adjusted correctly? | "Image" - "Picture Quality" - "Input Adjustment" p.16 | |
|
| |
Has the colour been adjusted | Use the "Color Adjustment" menu command to adjust the colour. | |
correctly? | "Image" - "Color Adjustment" p.17 | |
Have the colour intensity and Use the "Color Intensity" and "Tint" menu commands to adjust the
tint been adjusted correctly? colour and tint.
Only when projecting images from a video source
Images appear dark
"Image"- "Picture Quality" - "Color Intensity", "Tint" p.16
Has the image brightness been | Use the "Input Adjustment" and "Brightness" menu commands to make | |
adjusted correctly? | the adjustments. |
|
| "Image" - "Picture Quality" - "Input Adjustment", "Brightness" p.16 | |
|
| |
Has the image contrast | Use the "Contrast" or "White Level" menu command to adjust the contrast. | |
been adjusted correctly? | "Image" - "Picture Quality" - "Input Adjustment" p.16 | |
|
| |
Is the lamp due for | When the lamp is nearly due for replacement, the images will become | |
replacement? | darker and the colour quality will become poorer. When this happens, | |
| the lamp should be replaced with a new one. | |
|
|
|
Vertical stripes appear in the projected images
Have you done the "LCD Panel Adjust the "Vertical Stripe Adjustment R", "Vertical Stripe Adjustment
Adjustment"?G" and "Vertical Stripe Adjustment B" in the "LCD Panel Adjustment"
in the configuration menu. "Adjusting LCD Panel Adjustment" 
p.40 Example:
Image with vertical stripes | Image after adjustment |
34