Use the following part numbers when ordering:
Paper or other media | Size |
| Part number |
|
|
| |
Special coated paper for | Letter (8.5 × 11 inches) | S041062 | |
720 dpi | Legal (8.5 × 14 inches) | S041048 | |
|
|
|
|
Special coated paper for | Letter (8.5 | × 11 inches) | S041060 |
360 dpi |
|
|
|
|
|
|
|
Letter (8.5 | ×11 inches) | S041072 | |
|
|
|
|
Transparency film | Letter (8.5 | ×11 inches) | S041064 |
|
|
|
|
Setting the Paper Thickness and Adjustment Levers
Before you start printing, you should check the paper thickness and adjustment levers to make sure they are set correctly for the type of paper or other media you are loading.
Caution:
c Before you change the lever settings, make sure there is no paper in the paper path and that printing is paused. To do this, press the Pause button or turn off the printer.
Setting the Paper Thickness Lever
The paper thickness lever on the right side of the sheet feeder has two settings: plain paper and thick paper. Set the lever to the position that best suits the paper or other media you plan to use, as shown in the following table and illustration.
Paper type | Paper thickness lever position |
|
|
Standard paper | Plain paper |
|
|
Transparency film | Plain paper |
|
|
Envelopes or labels | Thick paper |
|
|
Paper Handling