Printing is temporarily suspended. Press the Pause button to continue.
Printing has stopped but the Pause light is off.One or both ink cartridges may be empty or too old. A cartridge is too old if it has been used longer than six months or beyond the date on its packaging. First clean the print heads as described earlier in this chapter. If this does not solve the problem, replace the ink cartridges.
c | Caution: |
If you replace an ink cartridge before its Ink Out light flashes, | |
the sensor that tells you when the ink is out will not work with | |
| the new cartridge. |
If pressing the Pause button does not turn on the Pause light, turn off your printer and disconnect the interface cable. Then reconnect the cable and turn on the printer.
The cable between the printer and computer may not meet the specifications for the printer or computer. See “System Requirements” in your Setup and Software Guide for cable guidelines.
Turn off the printer and perform a self test as described in Chapter 1 of your Setup and Software Guide. If the self test does not print, the problem is with the printer. If the self test prints correctly, the problem is probably caused by your software.
The Ink Out O or Ink Out NNN light flashes or remains on and the printer does not print.
One or both ink cartridges are low on ink or empty; replace the indicated cartridge as described in Chapter 3.
Troubleshooting