Calibrating the Printer When Printing from DOS
If vertical lines are misaligned when you print from DOS applications, you may need to calibrate the printer using its adjustment mode. To verify that your printer needs calibrating, print a demonstration page as instructed on page
Follow these steps:
1.Make sure paper is load in the printer and turn it off.
2.Hold down the Pause button and turn on the printer to enter printer adjustment mode. It prints a multilingual instruction sheet.
3.Follow the instructions on the sheet to calibrate your printer.
4.When you are finished, press Pause and turn off the printer to exit printer adjustment mode.
When you turn on the printer and send your next print job, the lines should be aligned.