Before sending print jobs to the printer, the EPSON Spool Manager stores them in a temporary directory. If you see conflict error messages or printing is very slow, the problem may be caused by other temporary files in this directory. To change the EPSON Spool Manager default directory, follow these steps:
1.Make a directory on your hard disk to store the Spool Manager files, for example, C:\SPLTEMP.
2.Open the EPSON program group and
Spool Manager icon.
3.Make sure Epson Stylus Color II is selected, and then open the Queue menu.
4.Select Setup. In the Queue Setup dialog box, change the spool directory to the one you created in step 1.
5.Also make sure the Use Print Manager for this port checkbox is checked. Then select OK.
6.Open the Options menu and select Default Spool Directory.
7.In the dialog box, change the spool directory to the one you created in step 1. Then select OK.
8.Close the Spool Manager.
The printer prints blank pages.Make sure EPSON Stylus COLOR II is selected as the default Windows printer driver (PC driver) or is the last printer selected in the Chooser (Macintosh driver).
Troubleshooting