Epson LS47P1, LS57P1 26Setting Up the TV, VCR and Satellite Receiver Connection

Note

Before connecting a satellite receiver to the TV, be sure to read any instructions that came with the receiver.

Note

If your satellite receiver doesn’t have an S-Video connector, you can connect a video cable (yellow) to the Video connectors instead of the S-Video cable using these instructions.

It’s best to connect your satellite receiver to the S-Video connectors on the back of the TV to free up the S-Video connector on the front to connect a camcorder.

VCR and Satellite Receiver Connection

1Turn off and unplug your TV, VCR, and satellite receiver.

2Connect the VCR as described in “VCR Connection” on page 23.

3Connect the satellite antenna cable to the Satellite In connector on your satellite receiver.

4Connect one end of an S-Video cable to one of the S-Video connector on your satellite receiver.

5Connect the other end of the S-Video cable to one of the S-Video connectors on your VCR.

6Connect one end of a standard, red/white audio cable to the R and L Audio Line Out connectors on your satellite receiver.

7Connect the other end of the audio cable to the R and L Audio Line In connectors on your VCR.

26Setting Up the TV