Note

You can use the buttons on the TV or the remote for all menu operations.

If you see one of these screens and you want to access the program, movie, channel, or input source, follow these steps:

1Press Enter. You see a screen asking you to enter your password.

2Enter your 4-digit password using the remote control number buttons.

The program, movie, channel, or input source is unblocked and the blocking feature is turned off.

To set up blocking again, see page 45 (for V-Chip blocking) or page 49 (for channel and input source blocking).

Skipping Unused Input Sources

As you switch between input sources using the TV/Video button, the TV goes to sources to which you’ve connected equipment. However, the TV goes to the DVI and PC sources even if you aren’t using them, unless you turn the ports off.

To turn off the DVI and PC ports when you’re not using them (so you don’t have to cycle through them with the TV/Video button), follow these steps:

1Press the Menu button on the TV panel or the remote control.

2To highlight the Setting menu tab, press Next >.

3Press Enter. The Auto Aspect setting is highlighted.

4Press Select d to highlight Use of DVI Input.

Use of DVI Input and

Use of PC Input settings

5Press Prev. < or Next > to turn the setting OFF.

6Repeat step 4 and 5 for the Use of PC Input setting.

7Press Menu to exit the menus.

52Setting Up and Controlling Channels