Note
If you have another TV signal source connected to the other antenna connector (ANT 1 or 2), press the TV/Video button to switch to that source. Then repeat steps
1 through 5 to set up the channels on that source too.
4First make sure the correct television source type is selected for Antenna 1 and/or Antenna 2. Select TV for broadcast television via an antenna outside your house. Select CATV for cable television via a cable service line brought into your house.
If you need to change the option, press Select d or Select u to highlight the Antenna 1 or Antenna 2 setting, then press Prev < or Next > to change the option.
5If you connected a source to the ANT 2 connector, press Select d to highlight the Use of Ant. 2 setting, then press Prev < or Next > to select On.
6Press Select d to highlight Auto Program, then press Enter.
The menu disappears and Auto Program Setting appears in the middle of the screen as the TV begins searching for available channels. It reports the current channel in the upper right corner. This process takes a few minutes, depending on the number of channels available.
When it’s finished, you return to the Channel menu.
If the automatic program doesn’t detect all of your available channels or if you want to set up the TV to skip certain available channels, follow the steps in the next section.