Note
If you’re viewing the Photo viewer in the right POP window, press Swap to select the other source before resizing the window. You can’t resize the Photo viewer window directly in POP mode.
•To resize the POP windows, press Swap to select the source, then press Next > to enlarge its window or Prev. < to reduce it. The size of the other window is also adjusted to fit the screen, as shown below.
]
Note
You also need to turn off the
Using Channel Zapping
Channel zapping lets you get a quick look at programs broadcast on up to seven additional channels while you’re watching a TV program on an eighth channel. If you see a different channel that you want to watch, you can make it your main program.
To use channel zapping, you must be using the jumper cable that connects the ANT 2 and RF Output ports. This cable was installed on your TV at the factory. You must also turn off the ANT 2 port using the menus, as described below. This frees the necessary tuner.
Turning Off the ANT 2 Port
1Make sure the jumper cable connecting the ANT 2 and RF Output ports is still installed on the back of your TV.
2Press the Menu button on the TV panel or remote control. You see the Video menu.