4Press Select d to highlight Auto Shutdown.

5Press Prev. < or Next > to select ON.

6Press Menu to exit the menu system. If there is no signal input after 30 minutes, the TV shuts off.

Controlling Other Equipment with the Remote Control

You can use the TV’s remote control to select functions on your other home theater equipment, such as your DVD player, VCR, or satellite receiver. That way, you can use just one remote to control your movies or TV programs.

First you must program your remote control so it knows what kind of equipment you’re using. You do this by entering a code that corresponds to the equipment and its manufacturer.

Programming the Remote Control

1Look up the three-digit code for your equipment and manufacturer in the tables beginning on page 72.

2Slide the switch on the top of the remote control to the setting for your equipment type. For example, to enter the DVD player code, slide the switch to the DVD setting.

3Hold down the Menu button on the remote control until its light comes on (about 2 to 3 seconds).

4Enter the three-digit code using the remote control number buttons (for example, 420). The remote control beeps once.

If it beeps 3 times, you’ve entered an invalid code. Repeat steps 3 and 4 using the correct code.

Note

If there are multiple codes listed for your equipment manufacturer and the first one you choose doesn’t work, try another code.

When your remote control batteries wear out, you’ll need to program the remote control again.

Light Equipment switch

Menu button

Number buttons

Using the TV Features 71